Results 1 to 8 of 8
-
12-06-2025, 04:33 PM #1
-
-
12-06-2025, 05:05 PM #2
If you're interested in buying, I have a 1987 DONRUSS #361 BARRY BONDS "RC". If buying, make a reasonable offer (don't forget shipping cost). Also, if buying, I could send it in a PWE (that would take 2 stamps, approx. $1.60), to decrease shipping cost (low bubble mailers are about $7.50-$8). Have a good evening, Rodney
-
12-06-2025, 07:27 PM #3
Rodney,
Why not get a Non Machinable stamp as they only cost 1.19 or so and they do not get fed thru the postal machine to prevent damage of a pwe. Just a thought to decrease cost as well,.
DONCard Supplies
Toploaders 60 point $4, 100 point $7, 140 point $4, 190 point $3, 240 point $3
Soft Sleeves Standard $1 and Thick $1.50
TOP-LOADER 3X4,100 CT PENNY SLEEVES INCLUDED $11
-
-
12-06-2025, 09:38 PM #4
Don, thanks for your message. However, that would now cost me more than regular stamps. A short while ago I bought a roll of "FOREVER" regular stamps. And, on that roll, I still have OVER 90 more to use (they've already been paid for). Also, with some light cardboard it is taped too. When I weigh it, and then check the info. on USPS , it ususlly comes up more than $1.19. Thanks for your info. though. Haven't had any issue in deals and/or trades when a card was sent in a PWE (I also write "PHOTO - DO NOT BEND" and underline it of the front of the envelop).
Have a good night, Rodney
-
12-11-2025, 09:59 PM #5
Can you use either of these 2?
1987 Donruss #361 Barry Bonds RC $15
1987 Topps #320 Barry Bonds RC $15
Id bite on a couple of Wanders
-
-
12-12-2025, 11:55 AM #6
which Franco cards were you interested in? Maybe we could make a larger trade? I was reading that Wander has a retrial coming up per his attorneys, so you never know.
Thanks,
Marc
-
12-12-2025, 04:45 PM #7
The ones I was primarily intersted in were the Panini /25 and the 3 donruss clolors
What exactly was the Panini
-
-
12-12-2025, 06:48 PM #8
The Panini rc is Chronicles Zenith
-
Please Note - steelers#1fan will ship to the following countries: US Only










Reply With Quote








