Need Help people !

[LeicesterBladex]

Hello everyone :)

Basically I started collecting cards about 3 months ago, and soon as I started I ordered some top loaders off amazon, once these arrived I found they were far to small for game used cards, and were intended for base cards. I also had the same problem with penny sleeves, as the ones I got are to small to fit in game used cards !

Tis hasn't been a problem as all cards I've ordered have come in penny sleeve and top loaders, however recently I've had a few mailers with no sleeves or loaders.

So after boring you all, can someone tell me what size top loaders and penny sleeves I need to fit game used cards ? Or even better find me some on eBay or amazon :)

Thanks to however can help

Blade

[boba]

75 pt toploaders will hold most gu. For thick, thick cards you should be safe and go with the 120 pt holders. Don't get 100 pt as they dont fit many cards. Hope this helps!

[LeicesterBladex]

75 pt toploaders will hold most gu. For thick, thick cards you should be safe and go with the 120 pt holders. Don't get 100 pt as they dont fit many cards. Hope this helps!

Helps me loads mate thanks ! Any idea on penny sleeves ?

[boba]

Helps me loads mate thanks ! Any idea on penny sleeves ?

Not sure on the penny sleeves because I can get the basic ones to fit on most cards, but there are these ones.

http://cgi.ebay.com/ws/eBayISAPI.dll...m=390227535432

I have bought them before but don't like them very much because most cards just fall out of them.

maybe someone else can help you out more on sleeves

[LeicesterBladex]

Not sure on the penny sleeves because I can get the basic ones to fit on most cards, but there are these ones.

http://cgi.ebay.com/ws/eBayISAPI.dll...m=390227535432

I have bought them before but don't like them very much because most cards just fall out of them.

maybe someone else can help you out more on sleeves

Great help mate, I may just try some regular ones, I may of got a bad batch ... The ones at the moment, I have to proper force the game used card in .. And I dint think they should be so tight and hard to fit in ..

[adadas101]

hey bro, if you have trouble with regular pennysleeves, try cutting off a small corner, works like a charm.

[LeicesterBladex]

hey bro, if you have trouble with regular pennysleeves, try cutting off a small corner, works like a charm.

thanks for the advice ! just tried this with one of the cards which was hard to get in, cut the corner off and it slid in fine ! Great Tip