Results 1 to 5 of 5
-
03-09-2012, 12:23 AM #1
One Touch Advice (The Cup cards)!
What size One Touch would I need for a typical Cup ARP??
-
-
03-09-2012, 12:25 AM #2
You need a 180, assuming it's from the last couple years. The 130 is just a little too tight and you are better being safe with it.
The last 2 years of Cup stuff is a little bigger IIRC, it's not exactly perfect in either one, but the 180 is the better option.
IIRC, if it's 08 or earlier though, they may fit in a 130, but someone else will need to confirm that since all my PC guys are 09-10 and 10-11.
-
03-09-2012, 12:38 AM #3
Thank you!!
-
-
03-09-2012, 12:42 AM #4
All of my cup cards of Plante and O'Marra seem to fit just fine in 130 point holders, but then again I only have a few of them so Im not to sure about other cards (some of mine are thicker than others even though they are of the same card. Probably the safest bet is to go with 180.
-
03-10-2012, 09:50 PM #5
For 05-06 to 08-09, they usually fit in a 130, but be careful with some of them. Some of them have patches that are a little bit thicker than usual and will require a 180. I have an Andre Kostitsyn The Cup 05-06 that doesn't even fit in a 180 just to let you know how a patch thickness can do the difference. I put it in something bigger just to make sure it won't damage the card with time.
For 09-10 and more, use a 180, I've never been able to put one of those in a 130 so far.
-
