Hot Prospects Autographed Patch Point Size

[TRDouble]

What is the size of the Hot Prospects Autographed Patch? I put one in a 180 Point One-Touch, but it's a tad too big. Would 130 pt be too small?

I hate trying to find the right sized top loaders and one-touch holders. Such a pain!

Thanks!

[canucksfan007]

There are very few that dont fit either. I know 09/10 Cup is maybe 1 - 2mm thicker than a 130pt, so this may be the same problem.

Couple things you can do:

1 - Just use a top loader ( not really a fan of this option )

2 - If the 130pt magnetic case closes, even though the card might be a bit big, can potentially use that ( if you dont mind your card being pressed by the top of the 12 touch )

3 - Use a 180pt magnetic case, to fill in the extra space fold a soft sleeve ( or however many you need ) until it fits to your liking.

IMO card companies should be forced to make their cards 1 of the sizes we can buy one touches for.

[jjdicaprio]

3 - Use a 180pt magnetic case, to fill in the extra space fold a soft sleeve ( or however many you need ) until it fits to your liking.

This is definitely the way to go in my book, I do it all the time and it works great.

[TRDouble]

Thanks, guys! I will use the soft sleeve method.

[LegendsCollector]

Ive built the hp patch set the last few years and actually used the pro-mold 120 pt for both the 13-14 and 14-15 years. They fit snug in a 120 unless the patch is crammed in the card, then the 120s wont close so I had a few I had to use a pro-mold 150 on since they don't make a 130. The cards are slightly thicker this year, I tried an ultra pro 130 pt and it fit very snug, it seemed too small for my liking. It closed but barely and I felt that it would easily come apart so either a 150 which works well for the ones Ive used so far or 180 with sleeves like others have mentioned will probably be needed.

[TRDouble]

Thanks, LegendsCollector.

I was in the process of buying some Pro-Mold 150 pt magnetic holders while I was organizing a box of cards and I came across a Crown Royale Silhouette Tye McGinn in a magnetic holder. No idea why it was not in a top loader, but the magnetic holder fit the Fleer Showcase Hot Prospects Autographed Patch perfectly. I wish I knew what size it was though.